This is some blog description about this site

PLASMA GOUGING - APPLICATION FOR PROTECTION COATINGS

PLASMA GOUGING
In many areas of industry, heavily stressed functional surfaces are reinforced by deposition welding protective coatings. During the service life of a component, it often makes sense to remove worn protective layers and to apply new protective coatings to the heavily stressed areas. Here, the plasma gouging process offers an economical and ecologic...
Continue reading

GETTING ORIGINAL DOESN´T ALWAYS MEAN GETTING THE BEST

Elektrody-SilverEx Thermacut
Most producers are facing strong competition, and to be successful they must earn a customer's trust. A good, long-term relationship is usually based on stable product quality, high-level customer support, and finally on the availability of technical support. As Thermacut ® has evolved over the 30 years of its existence, from an aftermarket produce...
Continue reading

SMALL CIRCLE CUTTING WITH A MACHINE AIR PLASMA SYSTEM

small circle cutting Thermacut
Cutting small holes with an air plasma system is a challenging task. It usually requires advanced professional skills and work experience. Deep knowledge of the plasma technology, material characteristics and proper setting of the machine are the key factors for great cutting performance. One of the most frequently asked questions from our customer...
Continue reading

MAINTENANCE TIPS FOR OPERATORS

MAINTENANCE TIPS FOR OPERATORS
Part 4 - EX-TRAFLAME ®   Our last article in this mini-series focuses on maintenance of the oxy-fuel system. As expressed in previous articles of this mini-series, downtime, expensive repair, scrappage and even personal injury can be a direct result of failure to correctly service and maintain the equipment. Setup a regular maintenance schedul...
Continue reading

MAINTENANCE TIPS FOR OPERATORS

Ex-Trabeam_Tituln-foto
Part 3 - EX-TRABEAM ® In order to achieve the best cutting results with the EX-TRABEAM ® laser cutting heads, cleaning and regular maintenance are the top priority. The reward for regular service and maintenance of the EX-TRABEAM ® laser cutting heads is reflected in cutting performance, reliability, and cost effectiveness. Read on and learn how to...
Continue reading

MAINTENANCE TIPS FOR OPERATORS

MAINTENANCE TIPS FOR OPERATORS
Part 2 - EX-TRACK ® CNC In this second part of our miniseries about a maintenance, the focus is on a caring for EX-TRACK ® CNC portable cutting system. In this article there are tips and advice on how best to maintain the machine to keep it fully workable and safe. Only regular maintenance helps to prevent unexpected machine failures. These failure...
Continue reading

MAINTENANCE TIPS FOR OPERATORS

Ex-Trafire_Thermacut
Part 1- EX-TRAFIRE ® The purchase of cutting equipment is a considered long lasting investment, irrespective of the type of cutting technology used, they all share one common factor: They have to be maintained. It is important that the equipment is serviced and maintained on a regular basis in order to keep it in tip top condition, equipment that i...
Continue reading

THREE GOOD REASONS TO BUY SMART SOLUTION REPLACEMENT FILTER CARTRIDGES

THREE GOOD REASONS TO BUY SMART SOLUTION REPLACEMENT FILTER CARTRIDGES
​ The Thermacut Smart Solution label signifies a wide range of cost effective, evaluated, high-quality products that are manufactured in the EU and comply with existing quality and work-place safety regulation standards. THERMACUT ® replacement filter cartridges are suitable for KEMPER ® fume extraction systems. They improve performance, extend the...
Continue reading

FACTORS THAT AFFECT THE LIFETIME AND PERFORMANCE OF A CNC OXY-FUEL NOZZLE

CNC OXY-FUEL NOZZLE
Do you know what affects the lifetime and performance of a CNC oxy-fuel nozzle the most? Most operators use their long-term work experience and set the CNC oxy-fuel machine in accordance with their requirements and previous experience. In respect to their knowhow, there's no harm in correctly refreshing the knowledge, understanding and the basis of...
Continue reading

2ND GENERATION OF EX-TRABEAM® LASER CUTTING HEADS

EX-trabeam Thermacut
SMART CUTTING. BEST RESULT. The slogan exactly describes what can be achieved with the new laser cutting heads by Thermacut ® . The intelligent fiber laser cutting heads in the new EX-TRABEAM ® series offer reliable, timeless, and cost-effective cutting technology for industrial applications up to 20 kW. Thermacut ® introduces EX-TRABEAM ® ECO, EX-...
Continue reading

ENHANCE YOUR LASER CUTTING WITH EX-TRABEAM® PERFORMANCE NOZZLES

ENHANCE YOUR LASER CUTTING WITH EX-TRABEAM® PERFORMANCE NOZZLES
Big improvement, faster cutting speed, lower gas cost and better cut quality. Those are main attributes describing new Performance nozzles developed by Thermacut ® . With the advanced Performance nozzles, you can increase the cutting speed up to 39% and reduce the gas pressure up to 26%, and at the same time achieve a significantly improved cutting...
Continue reading

ASSESSMENT OF OXY-FUEL CUT QUALITY

Thermacut Oxy-fuel
What to look for during oxy-fuel cutting and assessment of the cut quality? Thermacut® can reveal some of the typical cut quality errors that are commonly experienced, their cause and a few tips on how to eliminate them.   Although, the oxy-fuel cutting process is considered to be quite a simple one, sometimes operators can be faced with cut q...
Continue reading

MAKE YOUR TINSMITHING WORK EASIER WITH A SMALL YET POWERFUL PLASMA CUTTER

Thermacut EX-trafire
The potential uses of plasma cutters are vast. The cutting technology is well-known and widely used in industrial plants processing flat metallic materials, such as sheet steel of various thicknesses. However, plasma cutters will also find use in smaller companies that focus on cutting, bending or otherwise shaping thin metal sheets. A typical exam...
Continue reading

EX-TRACK® INTRODUCTION

ex-track Thermacut
Introducing the EX-TRACK® CNC, a compact track-mounted oxy-fuel or plasma CNC Profile Cutting System that´s lightweight, portable, and economical. The EX-TRACK® CNC is the first motor driven model in THERMACUT'S brand new "Value Series" of CNC Profile Cutting Systems, offering affordable profile cutting solutions. The size and weight of the EX-TRAC...
Continue reading

CRITERIA FOR SELECTING A SUITABLE AIR PLASMA ARC POWER SUPPLY

ex-trafire Thermacut
When selecting a suitable air plasma arc power supply, it is important to consider several key criteria. To achieve the maximum financial and performance benefit from an air plasma arc power supply, analyse the following prior to making a purchase.   As in the case of many tools and devices, making the right choice is important, taking time to...
Continue reading

FACTORS THAT AFFECT PLASMA ARC CUT QUALITY

EX-trafire 45SD
To get the best quality plasma arc cutting results, it is necessary to be aware of the main factors that affect cut quality. This article explains what those factors are! 7 MAIN FACTORS: Consumables, correct rating/condition ​ Amperage (Current) ​ Plasma arc and Shield gases ​ Arc voltage ​ Torch height ​ Cut speed ​     Kerf width ​ ​ CO...
Continue reading

DAMAGED ESAB® PT-36® TORCH INSULATOR? THERMACUT® HAS A SMART SOLUTION THAT SAVES YOU MONEY

izolator
​ Here is a perfect example of how Thermacut® approaches a common recurrence, rather than follow a trend of disposal, Thermacut® has set the trend of Renew and Reuse, by simply making the PT-36® insulator replaceable an otherwise perfectly good torch is given a new lease of life. This is a Smart Money-saving Solution . Ever had to throw away an ESA...
Continue reading

COMPETITIVE ADVANTAGES OF THE EX-TRAFIRE® PLASMA POWER SUPPLIES

EX-TRAFIRE
EX-TRAFIRE ® SD plasma cutting systems have been engineered out of a fully conceptual design, in which all components have been optimized and perfectly coordinated to deliver a class beating performance. INTEGRATED GRID CUTTING MODE All EX-TRAFIRE ® power sources feature an integrated GRID cutting mode which automatically switches between the pilot...
Continue reading

“SMART SOLUTION” FOR YOUR CUTTING.

smart_solution_logo_GRAY
It´s a well-known fact that THERMACUT ® produces a wide range of consumables for plasma, laser and oxy-fuel cutting. Some consumables are used for everyday cutting, and their lifetime corresponds with the usual standards of OEM manufacturers. However, we're also producing consumables that are superior to the original parts from some OEM manufacture...
Continue reading

CUSTOMERS HAVE THE RIGHT TO FAIR TRADE

Sales and service employees of replacement plasma cutting torches, leads and consumables manufacturers increasingly encounter confused customers. This confusion is often initiated by attempts from plasma cutting system Original Equipment Manufacturers (OEM's) to recover the market share they have lost to fair competition in the replacement torch, l...
Continue reading